Straight Knife Grinders & Sharpeners From MVM



Knife Grinding Machines
MVM BM
33" Automatic Knife Grinder with 2 HP
MVM ZX >
40" Automatic Knife Grinder with 2 or 3.5 HP
MVM PX
40" or 53" Automatic Knife Grinder with 3.5 or 6 HP
MVM MX
up to 120" Automatic Knife Grinder with 8.5 HP
MVM K
15 HP PLC Controlled Knife Grinder
MVM KX
25 HP PLC Controlled Knife Grinder
MVM FX20
25 or 35 HP PLC Controlled Knife & Surface Grinder
MVM FX40
50 or 60 HP PLC Controlled Knife & Surface Grinder
Specialty Machines & Devices
MVM
Automatic Knife Loader for use with Grinding Machines
MVM EH
Manual Edge Honing Device
MVM SBO
Automatic Edge Honing Device
MVM RDM
Manual Knife Straightening Machine
MVM RDA
Automatic Knife Straightening Machine



 

MVM ZX

40" Automatic Knife Grinder

MVM ZX Knife Grinder

 

Features:

  • Automatic head travel (11 m/min)
  • Automatic wheel downfeed can be set for per pass and total downfeed
  • Grinding Chuck tiltable 0 to 90 degrees
  • Grinding head tiltable +5 to –30 degrees
  • Heavy duty coolant system with static magnetic filter
  • Mechanical T-Groove chuck for stack grinding of knives with step blocks
  • Head travel guides are covered
  • Head travels on hardened and ground replaceable wear strips

Standard Machine Includes:

  • Heavy Duty machine stand
  • One 125mm (5”) vitrified cup wheel
  • One set of blade clamps
  • Set of Step Blocks for stacking up to 4 planer knives
    (1/8” x 40 degree back angle)

MACHINE SPECIFICATIONS
Max. Knife Length 1000mm (39”)
Chuck to wheel clearance 30mm (1.2”)
Grinding Motor 2 HP
Grinding Wheel Diameter 125mm (5 “)
(6” optional)
Grinding Wheel Bore 16mm (20mm on the 6”)
Chuck Width 100mm (3.9”)
Voltage 220V, 3Ph, 60Hz or 440v
(requires overload swap)
Weight 250kg (550 lbs)


MVM ZX 1000 Optional Accessories

  • Magnetic Chuck
  • Upgrade to 4HP & 6” Wheel (20mm bore)*
  • Variable Carriage Speed (4 to 11 m/min)*
  • 400mm Super Hi-Power Mag Plate
    for grinding carbide inserts*
  • Stops with sensors to limit the carriage travel*
  • Step Blocks for stacking up to 4 planer knives
    (must specify knife thickness and back angle)
  • Knife Extension resting blocks
    (allow knives that are wider than the chuck to be referenced from the back)
  • Rotary cutting edge references
    (Available on magnetic chuck only)
  • External Coolant Tank and Pump
    (Standard machine uses the carriage bed as a coolant tank)
  • Filler paper grid for external coolant tank

    *Option recommended to grind carbide inserts

220V Single Phase Power Options

  • Static Phase Converter (will reduce HP by 40%-single machine only)
  • Rotary Phase Converter (no loss in HP)

Recommended Grinding Wheels

  • 5” Borazon Wheel 11A2 150 grit
  • 5” Diamond Wheel 11A2 180 grit
  • 5” Vitrified Cup Wheel 46 grit
  • 6” Borazon Wheel 11A2 120 grit
  • 6” Diamond Wheel 11A2 (for Inserts) 180 grit
  • 6” Vitrified Cup Wheel 46 grit