Carbide Saw Grinding Machinery




Top & Face Grinders
UniMAX 750
Hydraulic
MAXimumTF850-SP
Fully Automatic with Standard Program
uniMAX NC
Fully Automatic with Standard Program
MAXimum TF850-FP
Fully Automatic with Free Programming
UTMA AL804
Fully Automatic with Periphery Grind
UTMA AL805 / AL1200
CNC Programmable with Top & Face Grind in one set-up
Dedicated Face Grinders
UTMA AP800
Premium NC Controlled Facer
MAXimum F850
Standard Facer
Side Grinders
UTMA AF800
Manual Single Side
uniMAX DS700
Manual Dual Side
uniMAX DUO
Automatic Dual Side
MAXimum DS1200 >
Automatic Dual Side
UTMA AF801
CNC Automatic Dual Side
Steel Relievers
UniMAX SR800
Automatic Steel Reliever



 

MAXimum DS1200

Automatic Dual Side Grinder

Maximum DS1200

Features:

  • Two 2 HP Precision spindle Grinding motors
  • Manual or Auto operation
  • Menu-driven Siemens operator interface, which allows various combo-programs and multi-pass operations
  • Independent Dial indicated side adjustment of each head
  • Auto load saw locator
  • Four Standard Grinding Programs
    1. No lift-off (grinds on the way in and out)
    2. Lift-off (grinds on the way in only)
    3. Step in (grinds on the way out only)
    4. Combination planer program (double indexes wide gullet)

Standard Machine Includes:

  • Heavy Flood Coolant system with metal screen
  • Low Voltage Machine Lamp
  • Magnetic saw receiver for saw blades with bore sizes (0.5-1.5”)
  • Set of saw bushings (1/2, 5/8, 3/4, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2”, 30mm)
  • Cup and cone saw blade holder (for bores from 5/8 to 2.5”)

MACHINE SPECIFICATIONS
Blade Diameters 4 – 34 inch (2 – 48” option)
Hook angles -15 to +45 degrees
Radial clearance angles -6 to +3 degrees
Tangential clearance angles 0 to 4 degrees
Grinding wheel diameter 4” (3” & 5”option)
Pneumatic requirements 100 PSI, 2 CFM
Voltage 230/460V, 3Ph, 60Hz
Weight 1,375 lbs


DS1200 Optional Accessories

  • Full cabin enclosure
  • Small saw option for saw diameters 2 to 6”(50 to 150mm) in automatic operation. *Can be installed after machine delivery
  • Manual small saw option 3.75-6” (95-150mm).
    *Can be installed after machine delivery.
  • Large saw option 34 to 48” above 10_hook part
  • Large saw option 34 to 48” below 10_hook part (a notch needs to be cut in the machine base for this operation)
  • Conical saw option with fixed stops, max. 6 degrees
  • Conical saw option with scales for setting
  • 3” & 5” Wheel Options. No charge factory only
  • 3” – useful for grinding tight tooth pitches options
  • 5” – useful for grinding non-ferrous blades and blades with thick teeth

Tool Holding

  • Saw bushings (0.5-1.5” 12-38mm)
  • Mag Saw receiver (1.6-4.0”, 39-101mm)
  • Mag saw receiver (4.1-8”, 102-203mm)
  • Saw bushings (1.6-3”, 39-76mm)
  • Saw bushings (3.1-5”, 77-127mm)
  • Saw bushings (5.1-8”, 128-203mm)
RECOMMENDED GRINDING WHEELS
4” Diamond wheel 1A1 150 grit C01024-02
4” CBN wheel 1A1 180 grit C01023-02
3” Diamond wheel 1A1 150 grit C01028-02
5” Diamond wheel 1A1 180 grit C01027-05