Clamex P Medius 14/10
Clamex P Medius complements the Clamex P-14 connectors for use in shelving units where two shelves meet the dividing panel at the same height. Medius consists of two parts with different installation depths. The lever part is installed in the shelf, anchored in a 14 mm deep P-System groove. Thanks to its installation depth of just 10 mm and crescent-shaped cut out, the second part can be fitted back-to-back in a dividing panel measuring just 16 mm (5/8") in thickness.

The form-locking P-System enables secure installation in the workpiece without the need for tools in just seconds. Clamex P does not require glue or screws, and thus offers numerous benefits in the manufacturing process while also distinguishing itself from standard connecting hardware.

Zeta P2 depth setting 14 and 10.
Benefits of Clamex P Medius 14/10

  • Practically wear-free knock down fitting
  • Same positioning of P-System grooves on both sides possible for dividing panels with a minimum thickness of 16 mm (5/8")
  • Minimal tool opening of just 6 mm
  • Fast, tool-free installation of connectors
  • Stackable for transport, with connectors pre-installed
  • Lateral tolerance for efficient installation with the Zeta P2 biscuit joiner or a CNC machine
  • Dividing panel connection of shelf units where two shelves meet the dividing panel at the same height. This removes the need to offset the cutting position on dividing walls and reduces potential errors
  • Surface installation in material thicknesses of 12 mm since one half of the connector is anchored just 10 mm deep
  • Knock down fitting for furniture, shelf units, fitted wardrobes, kitchen manufacturing etc.
  • Connecting fitting for detachable elements in shop fitting and trade show construction
  • Powerful alternative to standard connecting fittings
  • Rapid prototype construction before starting a new furniture range
  • On-site adjustments and assembly
Size: 66 × 27 × 9.7 mm • 52 × 7.5 × 9.7 mm
Cutter: Ø 100.4 × 7 × 22
Shell material: Fiberglass reinforced plastic
Lever material: Zinc die cast
Installation tolerance: Longitudinal ± 1 mm
Tensile strength:
Particle board: ~ 700 N ≈ 70 kg
Beech: ~ 900 N ≈ 90 kg

Secure On-line Ordering for U.S. Only - No order is processed until final checkout.
Clamex Medius Center Panel Connector in carton
(80 pair; requires Lamello Zeta or CNC machine with P-System Cutter)

- No. 145370 - $145.00
Clamex Medius Center Panel Connector in carton
(300 pair; requires Lamello Zeta or CNC machine with P-System Cutter)

- No. 145371 - $510.00
 Zeta P-System Carbide Cutter
Zeta P-System Carbide Cutter - No. 132141 - $145.00
 Zeta P-System Carbide Cutter
Zeta P-System Diamond Cutter - No. 132140 - $245.00