Dividing Panel Joints From 19mm with Tenso P-14

Would you like to connect dividing panel joints invisibly to one another? The offset installation of the Tenso P-14 allows glued joints from a material thickness of <br />19mm to be realised in almost no time.

Use a template with uniform spacing instead of marking repeatedly.

Clamp the template on the dividing panel as a stop.

Perform milling on the surface on both sides with depth setting 10.

Mill the P-System groove on the front side with depth setting 18.

Insert the Tenso P-14 element into the P-10 grooves.

Insert the Tenso P-14 element into the P-18 groove.

Preload the Tenso P-14 to facilitate assembly.

Apply glue.

Connect – finished!