Tenso P-10
The Tenso P-10 is a unique gluing aid, which eliminates the need for clamps or presses.

Developed for miters (45°) from a material thickness of 15 mm or butt joints (90°) from a panel thickness of 12 mm, the Tenso P-10 is ideal for glued furniture, components, small shelving units, door frames, trim, false edges, cubbies, plate racks, etc.

The preload clip enables the Tenso P to be preloaded anually in one simple step prior to gluing. The force required to join workpieces is reduced significantly thanks to the use of preloaded connectors. This is ideal for larger components with several joining elements, bulky parts or special angles. The preload clip is included with the Tenso P-10.
Benefits of The Tenso P-10

  • For thin materials
    • Concealed, self-clamping connector
    • High level of clamping force
    • For all angles
    • Extremely fast, tool-free installation of connectors
    • Stackable for transport, despite integrated connector
    • Lateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine
    • Self-clamping gluing aid for glued furniture, components, small shelving units, door frames, trim, false edges, cubbies, plate racks, etc.
    • Clamping Connector for concealed corner joints
    • Simpler and faster alternative to pipe and bar clamps
    • Faster gluing process; work pieces may be stacked directly after gluing
    • Application, adjustments and assembly are also possible on site
    Size: 52 x × 19 × 9.7 mm
    Cutter: Ø 100.4 × 7 × 22
    Shell material: Fiberglass reinforced plastic
    Installation tolerance: Lateral ± 1 mm
    Tightening force / clamping force: 40 lbs. / connector

    Secure On-line Ordering for U.S. Only - No order is processed until final checkout.

    PRE-ORDER ONLY: First availability March 30,2019
    Tenso P-10 with pre-load function (80 pair) - No. 145418 - $95.00
    (sold with pre-load clips)
    Tenso P-10 with pre-load function (300 pair) - No. 145428 - $300.00
    (sold with pre-load clips)
    • Zeta-P2

      The new machine for the evolving P-System saving you time daily!
    • lamello-zeta

      Zeta-P2 Base Plate

      Base plate, swiveling front stop and stop square are flush on both sides
    • Zeta P2 Joining

      How long does it take to make a joint? Approx. 2 mins for a corner connection with 2 connectors including: cutting 4 profile grooves, drilling 2 opening holes, sliding in 4 connector halves and assembling and tightening the joint.
    • Zeta P2 Cutter

      Zeta P2 comes with carbide tipped profile groove cutter or diamond tipped profile groove cutter.
    • P-System Depth Adjuster

      Rotating depth adjuster for cutting 5 P-System depths