The Most Advanced Joining Solution
INVIS is a product from Lamello - the inventors of the wooden biscuit joinery technique and the P-System. This invisible, detachable joining system is a unique way to save time and effort by allowing to join two parts with a completely hidden fastener, while leaving it detachable at any time. This offers almost limitless applications, using INVIS in combination with other joining techniques.
Whether you are looking for solutions to provide proprietary access, special aesthetics, knock-down installation, invisible clamping or joining dissimilar materials, INVIS can do the job. There is nothing comparable in the market and this is why the new product has won so many prestigious international awards. We hope to include you as one of our leading innovators.
The Economic Benefit of INVIS
INVIS has numerous advantages: time-saving, simple drilling, incredible strength, invisible, removable. Production and assembly is performed quickly whether in the factory or on-site. The INVIS actuator connects and detaches conveniently from outside.
Easy
Visible rotation in the Mx2 Minimag indicates if the connection is opening or closing.
The red arrow displays the correct positioning of the cube on the work piece.
Increased tolerance enables simplified handling during installing.
Efficient
Better handling- the double threaded elements allow the installation of Mx parts straight and quickly.
No drill or bit changes are required. The same screw bit is used for the element and the stud (mail and female).
The joining element and the stud can be mounted flush for easy stacking and for a slide-in assembly.
Powerful
A 50% larger magnet results in powerful clamping of the joint.
A 35mm long metal thread allows strong anchors – very useful in particleboard.
Flexible shaft on the Mx2 MiniMag: ideal angle drive, now Invis can reach the smallest corners.
How It Works
This is the principle that makes everything possible.
The rotating magnetic field of the Mx2 Minimag/ actuator drives the joining element just as one cogwheel drives the other. The screw within the joining element threads itself into the inside thread of the stud which is driven by the contact-free magnetic field to ensure a tight connection.
The Mx2 Minimag is attached to any standard drill with 1200-1500 RPM. The impact wrench effect of the INVIS fastener produces a knocking sound at the end of the screwing process (after approx. 5 seconds). This indicates that the connection is closed and also ensures amazingly high tightening values. To open the connection, the rotation of the actuator is reversed. It is held once again on the drill parallel to the fastener axes and the joint is opened without contact.
Invis Products
