Description
- 25HP Grinding Motor
- Rack Siemens PLC controls entire grind cycle belt drive system ensures smooth travel
- Carriage travels on lubricated Turcite pads gliding on protected replaceable wear strips ensuring minimal vibration
- Variable carriage speed (1 to 30 m/min)
- Permanent On/Off Magnetic Chuck with 20mm Pole Pitch
- Rapid Wheel downfeed during setup
- Transverse (cross-feed) movement of the grinding head by handwheel
- External bafold coolant system with 3 lines (one running through the center of the grinding spindle)
MVM KX 25HP PLC Controlled Knife Grinder
KX1500 For knives up to 1525mm (60”)
KX2100 For knives up to 2150mm (84”)
KX2500 For knives up to 2600mm (102”)
KX3100 For knives up to 3225mm (127”)
KX3600 For knives up to 3675mm (144”)
KX4100 For knives up to 4125mm (162”)
KX5100 For knives up to 5220mm (204”)
KX6100 For knives up to 6220mm (244”)
Longer lengths upon request
Standard Machine includes:
KX2100 For knives up to 2150mm (84”)
KX2500 For knives up to 2600mm (102”)
KX3100 For knives up to 3225mm (127”)
KX3600 For knives up to 3675mm (144”)
KX4100 For knives up to 4125mm (162”)
KX5100 For knives up to 5220mm (204”)
KX6100 For knives up to 6220mm (244”)
Longer lengths upon request
Standard Machine includes:
- 250mm Segment holder and set of 8 vitrified grinding segments
- Angular Divisor for tilting grinding chuck +/- 90° to within seconds
- Lateral Pads with geer box grease fittings
MVM KX Optional Accessories
Quick wheel attachment (no tools required)
Automatic Lubrication system
Grinding Wheel direction reversal by switch
Sprayer for cleaning parts
MVM KX Surface Grinding & Automation Options
- Robotic Loader
- Laser measuring system with wheel wear compensation
- Downfeed by workpiece sensing RTS-15 (used to compensate for wheel wear during surface grinding)
- Automatic approach of grinding wheel to the workpiece (Electronic sensing system useful for HSS applications)
- Superfinish auxiliary head with speed variator (Note: Reduces useful grinding length by 300mm)
- 6HP Universal Auxiliary head with auto-downfeed (Common for steel relief on carbide inlaid knives, honing, etc.)
- Motorized Magnetic Chuck Rotation controlled by PLC
- Wider permanent rotating magnetic chuck 200mm
- High Power 14mm pole pitch brass sealed Magnetic chuck
- Variable Grinding Wheel RPM (18 to 33 m/sec)
- Slow carriage creep feed (down to .3 m/min)
- 400mm Super Hi-Power Mag Plate for grinding carbide inserts
- Manual Edge reference (priced per meter)
- Rotating Cutting Edge references
- Free standing Electrical Cabinet
- Doctor blade mechanical gang clamping device for gang grinding up to 24 blades at a time (assumes blades are 1mm thick x up to 120mm tall)
- Automatic paper roll filtration system
- Manual paper roll filtration system
- Magnetic coolant cleaner with rotating discs
- Additional water pump for high pressure jet
- Mist Extraction System
Maximum Knife Length: Varies to 244"
Chuck to wheel clearance: 110mm (4.3”)
Grinding Motor: 25 HP
Grinding Wheel Diameter: 250mm (10“)
Grinding Wheel Bore: 127mm
Chuck Width: 150mm (5.9”) or 200 mm
Voltage: 220V, 3Ph, 60Hz
Shipping Weight: Varies from 4500 to 11,000 lbs
Chuck to wheel clearance: 110mm (4.3”)
Grinding Motor: 25 HP
Grinding Wheel Diameter: 250mm (10“)
Grinding Wheel Bore: 127mm
Chuck Width: 150mm (5.9”) or 200 mm
Voltage: 220V, 3Ph, 60Hz
Shipping Weight: Varies from 4500 to 11,000 lbs