MVM FX 20 w/25 or 35hp PLC Knife & Surface Grinder

FX20/1500 For knives up to 1525mm (60”)
FX20/2100 For knives up to 2150mm (84”)
FX20/2500 For knives up to 2600mm (102”)
FX20/3100 For knives up to 3225mm (127”)
FX20/3600 For knives up to 3675mm (144”)
FX20/4100 For knives up to 4125mm (162”)
FX20/5100 For knives up to 5220mm (204”)
FX20/6100 For knives up to 6100mm (240”)
FX20/7100 For knives up to 7175mm (282”)
Longer lengths upon request

Standard Machine includes:

  • 200mm Segment holder and set of 6 vitrified grinding segments
  • Angular Geer Box Divisor for tilting grinding chuck +/- 90°
  • Automatic Lubrication System
  • Quick wheel attachment system and reversal of wheel rotation
  • Lateral Pads with grease fittings
  • Sprayer for cleaning parts
MVM FX20 Surface Grinding & Automation Options
  • Robotic Loader
  • Automatic approach of grinding wheel with wheel wear compensation (Laser measuring system useful for any application, requires PLC magnet control)
  • Automatic approach of grinding wheel to the workpiece (Electronic sensing system useful for HSS applications)
  • Downfeed by workpiece sensing RTS-15 (used to compensate for wheel wear during surface grinding)
  • 6HP Universal Auxiliary head with auto-downfeed
  • Automatic hydraulic tilting of the Grinding Head
  • Doctor blade mechanical gang clamping device for gang grinding up to 24 blades at a time (assumes blades are 1mm thick x up to 120mm tall)
MVM FX20 Magnetic Chuck Options
  • Motorized Magnetic Chuck Rotation controlled by PLC
  • Wider rotating permanent magnetic chuck up to 300mm wide
  • High Power 14mm pole pitch brass sealed Magnetic chuck up to 300mm wide
MVM FX20 Micro Finishing Options
  • Variable Grinding Wheel RPM (18 to 33 m/sec)
  • Slow carriage speed (creep feed down to .3 m/min)
MVM FX20 Other Options
  • 35HP Grinding Motor
  • Manual Edge reference bar (priced per meter)
  • Rotating Cutting Edge references
  • Free standing Electrical Cabinet (For setting machine up close to a wall)
MVM FX20 Filtration Options
  • Automatic paper roll filtration system
  • Manual paper roll filtration system
  • Magnetic coolant cleaner with rotating discs
  • Additional water pump for high pressure jet
  • Mist Extraction System
MVM FX20 AbrasiveOptions
  • Single point diamond dressing attachment
  • Cup wheel flange for 200-250mm abrasive & CBN wheels
  • Ring wheel flange for 250mm ring wheels (bolt or glue in)
Maximum Knife Length: Virtually Unlimited upon request
Chuck to wheel clearance: 150mm (6”)
Grinding Motor: 25 HP (35hp optional)
Grinding Wheel Diameter: 250mm (10“)
Grinding Wheel Bore: 127mm
Chuck Width: 150mm (6”)
Voltage: 220V, 3Ph, 60Hz
Shipping Weight: Varies from 4900 lbs on up