G20 S2
G20 S2 is the Minispot grooving machine for milling out knots, resin pockets or damaged areas of all sizes up to a width of 20 mm. For each Minispot patch, the corresponding cutter is used. The transparent rear cover enables accurate positioning of the G20 S2 over the relevant area, thus ensuring a perfect repair. The angled stop in the accessories range is used to cut grooves in edges. A milling jig is also available and can be used to cut grooves for 85, 250 and 500 mm long patching rods.
  • Cutting of Minispot patch grooves of all sizes
  • Precision guidance with finished surface
  • Easy positioning with transparent cover
  • Controlled cutting via push-down lever
  • Anti-slide coating prevents slipping while coating
  • Suction nozzles for dust extraction
  • Cutting out wood defects such as resin pockets, knots and tears as well as areas that have suffered mechanical damage
  • Repair of high-quality wood, glulam beams, solid wood panels etc.
Power: 1000 W
Voltage: 230 V or 120 V
Speed: 10,000 minˉ¹
Max. Cutting Width: 20 mm
Weight: 4.4 kg
  • Handy Power Tool – G20 S2

    Handy power tool for use in workshops, continuous operation or on-site.
  • Minispot G20 S2

    Efficient repair of wood defects.
  • G20 S2 Minispot Grooving

    Grooving machine for Minispot grooves of all sizes
  • G20-S2 Patching

    Milling jig for Minispot patching rods
  • See-through Cover G20-S2

    Easy positioning due to see-through cover