Air over oil with Standard Programming

Features:

• Totally enclosed cabin with end of cycle indicator
• Specially balanced 2 HP grinding motor
• Height sensor with shut off
• PLC with nearly 100 Pre-set programs
• Dual pressure saw clamp with swing away arm
• Automatic central lubricating system
• Lift-Off face grinding
• Load Monitor shuts machine down extending machine life
  

Standard Machine Includes:

• 10 GPM flood coolant system with filter paper
• Precision saw lift
• Stainless steel shields
• Dual low voltage machine lamps
• Tooth Counter
• Magnetic saw receiver for saw blades with bore sizes (0.5-1.5”)
• Set of saw bushings (1/2, 5/8, 3/4, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2”, 30mm)
• Set of bevel angle bushings (5, 10, 15, 20, 25, 30, 35, & 40 degree)
  

MACHINE SPECIFICATIONS
Blade Diameters	4 – 34 inch (2 – 40” Option)
Grinding Motor	2 HP
Maximum blade thickness	.75 inch
Grinding Wheel Specs	6” x 1-1/4”
Pneumatic requirements	100 PSI, 2 CFM
Voltage	230/460V, 3Ph, 60Hz
Weight	2000 lbs

TF850-SP Optional Accessories for Tool Holding

• Mag Saw receiver (For Bore sizes 1.6-4.0”, 39-101mm)
• Mag saw receiver (For Bore sizes 4.1-8”, 102-203mm)
• Saw bushings (For Bore sizes from 0.5-1.5” 12-38mm)
• Saw bushings (1.6-3”, 39-76mm)
• Saw bushings (3.1-5”, 77-127mm)
• Saw bushings (5.1-8”, 128-203mm)
• Saw receiver (For Saws with 2-5” diameter)
  

RECOMMENDED GRINDING WHEELS
6” Diamond Wheel-Top 6A9	180/400 grit	C09006-02
6” Diamond Wheel-Top 6A9	220/600 grit	C09002-01
6” Diamond Wheel-Face 4A2P	180 grit	C06033-02
6” Diamond Wheel-Face 12V9 *For tight tooth pitches	180 grit	C13027-02
6” Diamond Wheel-Face 12V9 *For tight tooth pitches	180/400 grit	C13003-02