For cutting tools up to 300 mm. in diameter and profile lengths up to 250 mm.

Features:

• Profiles HSS moulder knives, carbide inserts, brazed cutters, L/R hand router bits, & raised panel cutters
• Rigid frame construction supports a 3HP grinding motor
• Grinds cutters up to 12” diameter and 10” length
• Grinds carbide inserts against the cutting edge
• Unlimited side clearance increments from 0 to 25°
• Fully adjustable for back clearance angles from 0 to 45°
  

Standard Machine Includes:

• Heavy Flood coolant system with manual paper roll filtration
• 1 Wheel Flange 1 1/4” shaft
• 3 Copy fingers of various diameters
  
  

MACHINE SPECIFICATIONS
Max. Tool Length	250mm (10”) 14” optional
Max. Tool Diameter	300mm (11.8”)
Grinding Motor	3 HP
Side Clearance	0 to 25 degree
Grinding Wheel Diameter	250mm (10”)
Grinding Wheel Bore	1”
Voltage	220/440V, 3Ph, 60Hz
Weight	950 lbs

P20 Optional Accessories

• Variable speed grinding wheel spindle
• Automatic wheel tilt by foot pedal for side clearances
• HSS Manual Dressing attachment
• Single knife holder
  (For cutting off HSS Knives and Carbide STB)
• Raised Panel Cutter Rest
• Router Bit profiling attachment with 12T Index plate
• Carbide Insert Attachment
  (Includes one clamping fixture For profiling carbide inserts)
• Mist extraction system for use with Synthetic coolants
• 14” Grinding Length Option (upgrade to P30)
• Central Lubrication System for X & Y axis (manual)
  

For Mounting HSS Moulding Knives & Brazed Cutters

• 3/4” Chucking Arbor with handwheel and spacer rings
• 1” Chucking Arbor with handwheel and spacer rings
• 1 1/4” Chucking Arbor with handwheel and spacer rings
• 1 13/16” Chucking Arbor with handwheel and spacer rings
• Custom Chucking Arbors for P20 any other size
• Hardened Reduction Ring available for 3/4” arbor (1, 1 1/8, 1 1/4, 1 1/2, 2”, 30mm, 40mm)
• P30 length Chucking Arbor (specify any size)
  

Other Accessories

• ER40 Collets for router bit attachment
  (1/4, 1/2, 5/8, 19-18mm, 3/4, 1”)
• Insert Clamping Fixtures for Carbide insert attachment
• Single Point Diamond for Dressing attachment
• Double Ended Copy Finger (2 & 3 mm)
• Double Ended Copy Finger (4 & 6 mm)
• Single Ended Flat Copy Finger (3mm)
• Single Ended Pointed Copy Finger
  
  

Recommended Grinding Wheels

• 10” Diamond wheel 14F1R, R=1.5 Roughing
• 10” Diamond wheel 14F1R, R=.75 Finishing
• 10” CBN wheel 14F1R, R=1.5 Roughing
• 10” CBN wheel 14F1R, R=.75 Finishing
• Resinoid Steel cutoff wheel
• 9” Ceramic wheel (3/16”) Roughing
• 9” Ceramic wheel (1/8”) Finishing
• Plastic Shims of various thickness Set of 7
• Wheel Flange (1-1/4, LH thread) P20