Straight Knife Grinders & Sharpeners From MVM



Knife Grinding Machines
MVM BM
33" Automatic Knife Grinder with 2 HP
MVM ZX
40" Automatic Knife Grinder with 2 or 3.5 HP
MVM PX
40" or 53" Automatic Knife Grinder with 3.5 or 6 HP
MVM MX >
up to 120" Automatic Knife Grinder with 8.5 HP
MVM K
15 HP PLC Controlled Knife Grinder
MVM KX
25 HP PLC Controlled Knife Grinder
MVM FX20
25 or 35 HP PLC Controlled Knife & Surface Grinder
MVM FX40
50 or 60 HP PLC Controlled Knife & Surface Grinder
Specialty Machines & Devices
MVM
Automatic Knife Loader for use with Grinding Machines
MVM EH
Manual Edge Honing Device
MVM SBO
Automatic Edge Honing Device
MVM RDM
Manual Knife Straightening Machine
MVM RDA
Automatic Knife Straightening Machine



 

More infoMVM MX

Up to 120" Automatic Knife Grinder

MVM MX150 Knife Grinder

 

MX1000 For knives up to 1010mm (39”) (3.3’)
MX1500 For knives up to 1520mm (59”) (4.9’)
MX2000 For knives up to 2025mm (78”) (6.6’)
MX3000 For knives up to 3030mm (119”) (9.9’)

Features:

  • 8.5HP Grinding Motor
  • Toothed belt drive system ensures smooth travel
  • Head travel can be limited by stops to improve efficiency
  • Stepless variable carriage speed from 2 to 20 m/min
  • 120mm Electromagnetic Chuck tiltable from 0 to 90°
  • Automatic electronic wheel downfeed for per pass and total downfeed
  • Automatic shutdown of machine after timed sparkout cycle

Standard Machine Includes:

  • 200mm (8”) Segment holder with 6 segments (flange also accepts cup wheels)
  • Heavy flood coolant system
  • Set of step blocks for stacking up to 4 planer knives
    (1/8” x 40 degree back angle)

MACHINE SPECIFICATIONS
Max. Knife Length Varies from 1 to 3m (up to 119”)
Chuck to wheel clearance 110mm (4.3”)
Grinding Motor 8.5 HP
Grinding Wheel Diameter 178mm (7”) or 200mm (8”)
Grinding Wheel Bore 78mm
Chuck Width 120mm (4.7”)
Voltage 220V, 3Ph, 60Hz
Weight Varies


MVM MX Optional Accessories

  • Superfinish head with speed variator
    (Useful grinding length of auxiliary head is 300mm shorter than main head)
  • 12 HP Motor Upgrade (Available on MX3000 only)

MVM MX Surface Grinding & Micro Finish Options

  • Variable Grinding Wheel RPM
  • Slow carriage speed (down to .3m/min)
  • Downfeed by workpiece sensing RTS-15
    (Compensates for wheel wear)
  • Electrical set up for RTS-15 (for aftermarket installations)
  • Grinding Wheel reversal by switch
  • Single point diamond dressing attachment
  • Super Hi-Power Mag Plate for grinding carbide inserts

MVM MX Magnetic Chuck Options

  • 14mm pole pitch brass sealed Magnetic chuck (priced per meter)
  • Angular Divisor for tilting the chuck +/90°
  • Rotating Cutting Edge references
    (for referencing off front of knife)
  • Knife Extension Resting Blocks
    (Allow knives that are wider than the chuck to be reference from the back)
  • Step blocks for stack-grinding planer knives
    (Must specify thickness and back angle)
  • Clamping Device for disposable Terminus specialty blades
  • Clamping Device for disposable Tersa, Centrofix or Sinus blades

MVM MX Filtration Options

  • Automatic paper roll filtration system
  • Magnetic coolant cleaner with rotating discs
  • Mist Extraction System

Recommended Grinding Wheels

  • 7” Diamond Wheel 11A2 (carbide/steel combo bond) 180 grit
  • 8” Diamond Wheel 11A2 400 grit
  • 8” CBN Wheel 11A2 150 grit
  • 7” Vitrified Cup Wheel 46grit
  • Vitrified Segments (6 required) 46grit
  • Vitrified Segments (6 required) 60grit