< Shown here with optional Auxiliary Head

KX1500 For knives up to 1525mm (60”)
KX2100 For knives up to 2150mm (84”)
KX2500 For knives up to 2600mm (102”)
KX3100 For knives up to 3225mm (127”)
KX3600 For knives up to 3675mm (144”)
KX4100 For knives up to 4125mm (162”)
KX5100 For knives up to 5220mm (204”)
KX6100 For knives up to 6220mm (244”)

Longer lengths upon request

Features:

• 25HP Grinding Motor
• Toothed belt drive system ensures smooth travel
• Carriage travels on lubricated Turcite pads gliding on protected replaceable wear strips ensuring minimal vibration
• Variable carriage speed (1 to 30 m/min)
• Permanent On/Off Magnetic Chuck with 20mm Pole Pitch
• Automatic electronic wheel downfeed for per pass and total downfeed
• Rapid Wheel downfeed during setup
• Transverse (cross-feed) movement of the grinding head by handwheel
• External bafold coolant system with 3 lines
  (one running through the center of the grinding spindle)
  
  

Standard Machine Includes:

• 250mm Segment holder and set of 8 vitrified grinding segments
• Angular Divisor for tilting grinding chuck +/- 90°
• Lateral pads with grease fittings
  
  

MACHINE SPECIFICATIONS
Max. Knife Length	Varies from 1500 to 6100mm
Chuck to wheel clearance	110mm (4.3”)
Grinding Motor	25 HP
Grinding Wheel Diameter	250mm (10“)
Grinding Wheel Bore	127mm
Chuck Width	150mm (5.9”)
Voltage	220V, 3Ph, 60Hz
Weight	Varies from 2295 to 4910 kg

MVM KX Optional Accessories

• Grinding process programmable by PLC with memory
• Quick wheel attachment (no tools required)
• Automatic Lubrication system
• Grinding Wheel reversal by switch
• Sprayer for cleaning parts
  
  

MVM KX Surface Grinding & Automation Options

• Robotic Loader
• Laser measuring system with wheel wear compensation
• Downfeed by workpiece sensing probe RTS-15
  (used to compensate for wheel wear during surface grinding)
• Automatic approach of grinding wheel to the workpiece
  (Electronic sensing system useful for HSS applications)
• Superfinish auxiliary head with speed variator
  (Note: reduces useful grinding length by 300mm)
• Electrical set up for Superfinish head (allows aftermarket retrofit)
• 6HP Universal Auxiliary head with auto-downfeed
  (Common for steel relief on carbide inlaid knives, honing, etc.)

  Optional Auxiliary head grinding the inside of a Metal Prism

• Electrical set up for Universal head (allows aftermarket retrofit)
  

MVM KX Magnetic Chuck Options

• Motorized Magnetic Chuck Rotation controlled by PLC
• Wider permanent rotating magnetic chuck 200mm
• High Power 14mm pole pitch brass sealed Magnetic chuck
  

MVM KX Micro Finishing Options

• Variable Grinding Wheel RPM (18 to 33 m/sec)
• Slow carriage speed (down to .3 m/min)
• 400mm Super Hi-Power Mag Plate for grinding carbide inserts
  
  

MVM KX Other Options

• Manual Edge reference (priced per meter)
• Rotating Cutting Edge references
• Free standing Electrical Cabinet
• Doctor blade mechanical gang clamping device for gang grinding up to 24 blades at a time (assumes blades are 1mm thick x up to 120mm tall)
  

Gang Grinding 50 Doctor blades in one setup

MVM KX Filtration Options

• Automatic paper roll filtration system
• Manual paper roll filtration system
• Magnetic coolant cleaner with rotating discs
• Additional water pump for high pressure jet
• Mist Extraction System
  
  

Recommended Grinding Wheels

• 10” Diamond Wheel 11A2 400 grit
• 10” CBN Wheel 11A2 120 grit
• Vitrified Segments (8 required) 46grit
• Vitrified Segments 60grit
• 10" Cup Wheel
• 10" Ring Wheel