UTMA LC35 Manual Tool and Cutter Grinder
UTMA Model LC35-S Semi-Auto Tool & Cutter Grinder
Left to Right (X-Axis Travel is automatic with variable speed)
Features:
- Universal machine for straight and helical grinding
- For tools under 12” diameter and 14” length
- Precision workhead with Multiple pivot points, MT4 Taper, 24T Index Plate, and Fine rake angle adjustment
- Two speed, 3HP Grinding motor rotates 360 degrees
- Table rides smoothly on hardened and ground cross roller bearings
- Adjustable travel limit switches improve efficiency
- Heavy Flood coolant system with external baffle tank
Standard Machine Includes:
- High Splash Protection Shield on Right hand side of machine
- 2 wheel flanges 20 x 60mm (1 Right thread, 1 Left thread)
| MACHINE SPECIFICATIONS |
| Max. Table Travel |
350mm (14”) |
| Max. Tool Diameter |
300mm (12”) |
| Grinding Motor |
1 HP |
| Grinding Wheel diameter |
Up to 150mm (6”) |
| Grinding wheel bore |
20mm |
| Voltage |
230 or 460V, 3Ph, 60Hz |
| Weight |
550kg (1220 lbs) |
LC35 Optional Accessories
- Variable wheel speed via Electronic speed variator
*useful when grinding router bits with smaller diamond or CBN wheels
- Tailstock for support of large tools
- Attachment for grinding chains
- Attachment for grinding Circular Saws
- Attachment for grinding boring bits
- Attachment for grinding chisels and claw tools
- Attachment for grinding planning and full cutterheads
- Attachment for grinding planner knives (outside the head)
- Feed finger rest for grinding O.D. of Helical tools
- LC35 Workhead sold Separately
*MT4 Taper, Z=24, multiple pivot points
For Mounting Cutters
- Chucking arbor 3/4” x 7” MT4
- Reduction rings for 3/4” arbor (1, 1 1/8, 1 1/4, 1 1/2, 2”, 30mm, 40mm)
- Chucking arbors MT4 x 180mm (7”) (specify size required )
- Chucking arbors MT4 x 310mm (12”)(specify size required )
For Mounting Shank Tools
- Collet Holder
- Collet Wrench -Spanner
- ER40 Collets (5/8, 3/4, 1”, 19-18mm, 22mm)
- Collet Extension (requires a 19-18mm collet)
- ER20 Collets (1/4, 3/8, 1/2”)
Grinding Wheel Flanges
- Wheel flange 20/60 (for cutters & saws)
- Wheel flange 20/60 x 110mm extended
- Wheel flange 20/35 (for router bits & spiral OD/Ends)
- Wheel flange 13/25 for use with 2” wheels
Grinding wheels for cutters & saws
- 6” Diamond wheel 12A2 280 grit
- 6” Borazon wheel 12A2 180 grit
Grinding wheels for Router bits, spiral o.d./ends
- 3” Diamond wheel 11V9 180 grit
- 3” CBN wheel 11V9 150 grit
- 2” Diamond wheel 11V9 180 grit
- 2” CBN wheel 11V9 150 grit
Carbide Insert Package
- 400mm Hi-Power Mag. Plate for grinding carbide inserts
- 6” Diamond wheel 12A2
- Wheel flange 20/35
